LTP Output/Log (Report Generated on Чтв ноя 8 19:48:26 EET 2018)

 PASSED   FAILED   WARNING   BROKEN   RETIRED   CONFIG-ERROR 

Meaning of the following KEYWORDS in test results/logs:
  • TPASS - Indicates that the test case had the expected result and passed
  • TFAIL - Indicates that the test case had an unexpected result and failed.
  • TBROK - Indicates that the remaining test cases are broken and will not execute correctly, because some precondition not met, such as a resource not being available.
  • TCONF - Indicates that the test case was not written to run on the current harware or software configuration such as machine type, or, kernel version.
  • TWARN - Indicates that the test case experienced an unexpected or undesirable event that should not affect the test itself such as being unable to cleanup resources after the test finished.
  • TINFO - Specifies useful information about the status of the test that does not affect the result and does not indicate a problem.


  • Click Here for Detailed Report
  • Click Here for Summary Report

  • Detailed Report

    No Test-Name Start-Time Command-Line Contacts Analysis Test-Output Initiation-Status Duration Termination-type Termination-id Core-File cutime cstime

    1

    kmsg01

    Thu Nov  8 19:48:26 2018

    "kmsg01"

    ""

    exit

    tst_test.c:1085: INFO: Timeout per run is 0h 05m 00s 
    kmsg01.c:301: INFO: TEST: injected messages appear in /dev/kmsg 
    kmsg01.c:343: PASS: injected messages found in log 
    kmsg01.c:344: PASS: sequence numbers grow as expected 
    kmsg01.c:251: INFO: TEST: nonblock read 
    kmsg01.c:256: PASS: non-block read returned EAGAIN 
    kmsg01.c:267: INFO: TEST: blocking read 
    kmsg01.c:272: PASS: read blocked 
    kmsg01.c:283: INFO: TEST: partial read 
    kmsg01.c:288: PASS: read failed as expected: EINVAL 
    kmsg01.c:358: INFO: TEST: mult. readers will get same first message 
    kmsg01.c:394: PASS: all readers got same message on first read 
    kmsg01.c:412: INFO: TEST: read returns EPIPE when messages get overwritten 
    kmsg01.c:417: INFO: first seqno: 0 
    kmsg01.c:430: INFO: first seqno now: 464 
    kmsg01.c:442: PASS: read failed with EPIPE as expected 
    kmsg01.c:448: INFO: TEST: Subsequent reads() will return available records again 
    kmsg01.c:452: PASS: after EPIPE read returned next record 
    kmsg01.c:484: INFO: TEST: seek SEEK_SET 0 
    kmsg01.c:533: PASS: SEEK_SET 0 
    kmsg01.c:539: INFO: TEST: seek SEEK_END 0 
    kmsg01.c:543: PASS: SEEK_END 0 
    kmsg01.c:549: INFO: TEST: seek SEEK_DATA 0 
    kmsg01.c:557: PASS: SEEK_DATA 0 
     
    Summary: 
    passed   11 
    failed   0 
    skipped  0 
    warnings 0 
    

    "ok"

    1

    exited

    0

    no

    4

    33

    2

    fw_load

    Thu Nov  8 19:48:27 2018

    "fw_load"

    ""

    exit

    fw_load     1  TPASS  :  Expect: can load firmware '.../n0_load_tst.fw' 
    fw_load     2  TPASS  :  Expect: can load firmware '.../n1_load_tst.fw' 
    fw_load     3  TPASS  :  Expect: can load firmware '.../n2_load_tst.fw' 
    fw_load     4  TPASS  :  Expect: can load firmware '.../n3_load_tst.fw' 
    fw_load     5  TPASS  :  Expect: can't load firmware '.../n4_load_tst.fw' 
    

    "ok"

    0

    exited

    0

    no

    1

    0

    3

    rtc01

    Thu Nov  8 19:48:27 2018

    "rtc01"

    ""

    exit

    rtc01       0  TINFO  :  RTC READ TEST: 
    rtc01       1  TPASS  :  RTC READ TEST Passed 
    rtc01       0  TINFO  :  Current RTC date/time is 8-11-2018, 17:48:27. 
    rtc01       0  TINFO  :  RTC ALARM TEST : 
    rtc01       0  TINFO  :  Alarm time set to 17:48:32. 
    rtc01       0  TINFO  :  Waiting 5 seconds for the alarm... 
    rtc01       0  TINFO  :  Alarm rang. 
    rtc01       2  TPASS  :  RTC ALARM TEST Passed 
    rtc01       0  TINFO  :  RTC UPDATE INTERRUPTS TEST : 
    rtc01       0  TINFO  :  Waiting for  5 update interrupts... 
    rtc01       0  TINFO  :  Update interrupt 1 
    rtc01       0  TINFO  :  Update interrupt 2 
    rtc01       0  TINFO  :  Update interrupt 3 
    rtc01       0  TINFO  :  Update interrupt 4 
    rtc01       0  TINFO  :  Update interrupt 5 
    rtc01       3  TPASS  :  RTC UPDATE INTERRUPTS TEST Passed 
    rtc01       0  TINFO  :  RTC Tests Done! 
    

    "ok"

    10

    exited

    0

    no

    0

    1

    4

    ltp_acpi

    Thu Nov  8 19:48:37 2018

    "ltp_acpi"

    ""

    exit

    ltp_acpi    1  TPASS  :  Test-case '0' 
    ltp_acpi    2  TPASS  :  Test-case '1' 
    ltp_acpi    3  TPASS  :  Test-case '2' 
    ltp_acpi    4  TPASS  :  Test-case '3' 
    ltp_acpi    5  TPASS  :  Test-case '4' 
    ltp_acpi    6  TPASS  :  Test-case '5' 
    ltp_acpi    7  TPASS  :  Test-case '6' 
    ltp_acpi    8  TPASS  :  Test-case '7' 
    ltp_acpi    9  TPASS  :  Test-case '8' 
    ltp_acpi   10  TPASS  :  Test-case '9' 
    

    "ok"

    0

    exited

    0

    no

    0

    1

    5

    cpufreq_boost

    Thu Nov  8 19:48:37 2018

    "cpufreq_boost"

    ""

    exit

    cpufreq_boost    0  TINFO  :  found 'acpi_cpufreq' driver, sysfs knob '/sys/devices/system/cpu/cpufreq/boost' 
    cpufreq_boost    0  TINFO  :  maximum speed is 2661000 KHz 
    cpufreq_boost    0  TINFO  :  load CPU0 with boost enabled 
    cpufreq_boost    0  TINFO  :  elapsed time is 1850 ms 
    cpufreq_boost    0  TINFO  :  load CPU0 with boost disabled 
    cpufreq_boost    0  TINFO  :  elapsed time is 2015 ms 
    cpufreq_boost    1  TPASS  :  compare time spent with and without boost (-2%) 
    

    "ok"

    3

    exited

    0

    no

    384

    2

    6

    uaccess

    Thu Nov  8 19:48:41 2018

    "uaccess"

    ""

    exit

    ltp_uaccess    0  TINFO  :  TC 0: read user-space memory from kernel, ptr '0x5610f06551a0' 
    ltp_uaccess    1  TPASS  :  copy_from_user(), get_user(): strings equal 
    ltp_uaccess    0  TINFO  :  TC 1: write from kernel-space to user-space, ptr '0x7ffdc53041cc' 
    ltp_uaccess    2  TPASS  :  copy_to_user(), put_user(): strings equal 
    

    "ok"

    1

    exited

    0

    no

    0

    1

    7

    rcu_torture

    Thu Nov  8 19:48:42 2018

    "rcu_torture.sh"

    ""

    exit

    rcu_torture 1 TINFO: estimate time 4.00 min 
    rcu_torture 1 TINFO: rcu: running 60 sec... 
    rcu_torture 1 TPASS: rcu: completed 
    rcu_torture 2 TINFO: rcu_bh: running 60 sec... 
    rcu_torture 2 TPASS: rcu_bh: completed 
    rcu_torture 3 TINFO: srcu: running 60 sec... 
    rcu_torture 3 TPASS: srcu: completed 
    rcu_torture 4 TINFO: sched: running 60 sec... 
    rcu_torture 4 TPASS: sched: completed 
    rcu_torture 5 TINFO: cleanup 
    

    "ok"

    243

    exited

    0

    no

    5

    5

    8

    lock_torture

    Thu Nov  8 19:52:45 2018

    "lock_torture.sh"

    ""

    exit

    lock_torture 1 TINFO: estimate time 6.00 min 
    lock_torture 1 TINFO: spin_lock: running 60 sec... 
    lock_torture 1 TPASS: spin_lock: completed 
    lock_torture 2 TINFO: spin_lock_irq: running 60 sec... 
    lock_torture 2 TPASS: spin_lock_irq: completed 
    lock_torture 3 TINFO: rw_lock: running 60 sec... 
    lock_torture 3 TPASS: rw_lock: completed 
    lock_torture 4 TINFO: rw_lock_irq: running 60 sec... 
    lock_torture 4 TPASS: rw_lock_irq: completed 
    lock_torture 5 TINFO: mutex_lock: running 60 sec... 
    lock_torture 5 TPASS: mutex_lock: completed 
    lock_torture 6 TINFO: rwsem_lock: running 60 sec... 
    lock_torture 6 TPASS: rwsem_lock: completed 
    lock_torture 7 TINFO: cleanup 
    

    "ok"

    360

    exited

    0

    no

    8

    6

    9

    zram01

    Thu Nov  8 19:58:45 2018

    "zram01.sh"

    ""

    exit

    zram01 1 TINFO: create '4' zram device(s) 
    zram01 1 TPASS: test succeeded 
    zram01 2 TCONF: The device attribute max_comp_streams was introduced in kernel 3.15 and deprecated in 4.7 
    zram01 2 TINFO: test that we can set compression algorithm 
    /opt/ltp/testcases/bin/zram01.sh: 101: local: 842: bad variable name 
    

    "ok"

    0

    exited

    2

    no

    1

    1

    10

    zram02

    Thu Nov  8 19:58:45 2018

    "zram02.sh"

    ""

    exit

    zram02 1 TINFO: create '1' zram device(s) 
    zram02 1 TFAIL: unexpected num of devices: 4 
    zram02 2 TINFO: zram cleanup 
    sh: echo: I/O error 
    incrementing stop 
    

    "ok"

    0

    exited

    1

    no

    0

    1

    Summary Report

    Test Summary

    Pan reported some Tests FAIL

    LTP Version 20180926
    Start Time Чтв ноя 8 19:48:26 EET 2018
    End Time Чтв ноя 8 19:58:45 EET 2018
    Log Result /opt/ltp/results
    Output/Failed Result /opt/ltp/output
    Total Tests10
    Total Test TPASS: 10
    Total Test TFAIL: 0
    Total Test TBROK 0
    Total Test TWARN 0
    Total Test TCONF 0
    Kernel Version Linux version 4.19.1-dragon-westmere (buildd@lcy01-amd64-024) (gcc version 8.2.0 (Ubuntu 8.2.0-7ubuntu1)) #201811060006-Ubuntu SMP Tue Nov 6 20:52:51 UTC 2018
    Machine Architecture x86_64
    Hostname wip